ATTiny löten und programmieren

Grundschaltung LED:

ATTiny-Schaltung:

Hier kommt Code:

#include <Adafruit_NeoPixel.h> #include <avr/power.h> // Required for 16 MHz Adafruit Trinket

#define LED_PIN 0

#define LED_COUNT 100

Adafruit_NeoPixel strip(LED_COUNT, LED_PIN, NEO_GRB + NEO_KHZ800);

void setup() { clock_prescale_set(clock_div_1);

strip.begin(); // INITIALIZE NeoPixel strip object (REQUIRED) strip.show(); // Turn OFF all pixels ASAP strip.setBrightness(50); // Set BRIGHTNESS to about 1/5 (max = 255) }

void loop() { rainbow(5); // Flowing rainbow cycle along the whole strip }

void rainbow(int wait) {

for(long firstPixelHue = 0; firstPixelHue < 5*65536; firstPixelHue += 256) { for(int i=0; i<strip.numPixels(); i++) { // For each pixel in strip…

int pixelHue = firstPixelHue + (i * 65536L / strip.numPixels());

strip.setPixelColor(i, strip.gamma32(strip.ColorHSV(pixelHue))); } strip.show(); // Update strip with new contents delay(wait); // Pause for a moment

} }